ASTEG - Deburr Bits

Deburrs the top of the tapped hole while the tap is being withdrawn from the workpiece.
No reversal cut in the chamfer due to tool cutting only in reverse.
Creates a chamfer for easy screw insertion; leaves no burr to clog the tapped hole.
Used on N/C machining centers and transfer machines, saves a complete station cycle.
Absence of burr eliminates rocking between mating surfaces.
Deburrs to consistent depth even though work pieces vary in thickness.
No additional power required.
Easy to install; simply slip over tap.
Resharpening with simple radial relief grinding fixture

FOR A FREE BROCHURE CONTACT Asteg Sales

back to top
Tel 02 9834 6034 - Fax 02 9834 6105 - Email for info sales@asteg.com
Sales Office: 134 Pine Creek Circuit, St Clair NSW 2759 Sydney (Aust) Warehouse: Unit 3008 / 2 Zeleny Rd Minchinbury NSW Sydney (Aust) home \| about us \| news \| specials \| faq \| contact us \| search Prices shown exclude GST and are subject to change without notice. © Asteg Sales 2002.