TUM Milling Machines - TUM 20VS, 30 VA, 40VS
  

 

 

TUM-20VS - Variable Speed Head

  • Spindle speeds-infinitely variable from 60 to 4200 R.P.M
  • Power feed per spindle revolution- .0017" .0032" .0053 (.04.08.13mm)
  • Motor-3HP
  • Noise level: 75db

TUM-20VA Head

  • Spindle speeds 80, 135, 210, 325, 660, 1115, 1750, 2720 R.P.M
  • Power feed per spindle revolution- .0017" .0032" .0053 (.04.08.13mm)
  • Motor-2HP
  • Noise level: 70db

 
TUM-20VS/TUM-20VA
 
inches
metric
Table length
42
49
1067
1245
Longitudinal travel-manual
27.95
33.46
710
850
Longitudinal travel- power feed
26.38
31.89
670
810
Cross travel
12.40
315
Vertical travel of knee
16.14
410

Overall height
80.81
2045
Overall depth
63.75
1620
Overall width
85.83
98.03
2180
2490
Table to spindle - min
1.97
50

max
18.11
460
Head 45 deg inward - min
0
0

max
11.42
290
Head 90 deg - min
7.48
190

max
19.29
490
Head 45 deg outward - min
10.24
260

max
22.05
560

 

TUM-30VA Head

  • Spindle speeds 80, 135, 210, 325, 660, 1115, 1750, 2720 R.P.M
  • Spindle taper- R8 or N.S.T. #30
  • Quill travel - 5" (127mm)
  • Motor-2HP
  • Noise level: 70db

TUM-30VS - Variable Speed Head

  • Spindle speeds-infinitely variable from 60 to 4200 R.P.M
  • Power feed per spindle revolution- .0017" .0032" .0053 (.04.08.13mm)
  • Motor-3HP
  • Noise level: 75db
 
TUM-30VA/TUM-30VS
 
inches
metric
Table size
10x50
(254x1270)
Longitudinal travel-manual
31.50
800
Longitudinal travel- power feed
29.92
760
Cross travel
15
385
Vertical travel of knee
17.32
440

Overall height
83.86
2130
Overall depth
74
1880
Overall width
97.64
2480
Table to spindle - min
0
0

max
17.32
440
Head 45 deg inward - min
0
0

max
16.93
430
Head 90 deg - min
8.66
220

max
26.77
680
Head 45 deg outward - min
11
280

max
29.13
740

 

TUM-40VS - Variable Speed Head

  • Spindle speeds infinitely variable - (low) 60 to 410 R.P.M, (high) 520-3525 R.P.M
  • Motor-5HP
  • Noise level: 75db

TUM-40VA Head

  • Safety Covers
  • 10 Spindle speeds (low) 70-340 R.P.M, (high) 570-2800 R.P.M
  • Power feed per spindle revolution- .0017" .0032" .0053 (.04.08.13mm)
  • Motor-3HP
  • Noise level: 70db
 
TUM-40VS/TUM-40VA
Table size
10x50 (254x1270)
10x54 (254x1370) optional
Table Travel
31.50(800)
35.43(900) optional
Cross travel
16.14(410)
Ram Travel
24(610)
Knee Travel
16.54(420)
Quill Travel
6(152.4)
Quill power feed rate
0.0015, 0.003, 0.006 (.04, .08, .15mm)/rev
Verticla spindle taper
ISO 40

Overall height
87.80 (2230)
Overall depth
75.59(1920)
Overall width
97.64
Table to spindle - min
1.38(35)

max
17.91(455)
Head 90 deg - min
3.54(90)

max
27.56(700)
Spindle motor
5HP/4POLE
 3HP/4POLE

Net Weight
3080 lbs (1400kg)
Q'ty per 20' container
12 sets
 
back to top
Tel 02 9834 6034 - Fax 02 9834 6105 - Email for info sales@asteg.com

Sales Office: 134 Pine Creek Circuit, St Clair NSW 2759 Sydney (Aust)
Warehouse: Unit 3008 / 2 Zeleny Rd Minchinbury NSW Sydney (Aust)

home | about us | news | specials | faq | contact us | search
Prices shown exclude GST and are subject to change without notice.
© Asteg Sales 2002.